The most popular FPV camera from SecurityCamera2000.com, now with IR filter. This is a 600TVL FPV board camera with Nextchip 2040 DSP, Samsung and Panasonic resistance components, and a Tantalum capacitor. It is installed with dual 850nm IR filters which block IR light, providing true-to-life image colors. This camera is very suitable for FPV. Mavbot has also added the DIY filter kit so you can run your camera and video transmitter off your 3S LiPo without needing a separate battery. Kit contains a diode to reduce voltage from 3S LiPo to the range required by the camera, and a 105°C 330µF capacitor and ferrite ring you can use to make a filter to remove the interference lines from your motors and ESCs. Solder your V+ to the camera thru the diode to drop the voltage, and solder the capacitor accross V+ and GND (the stripe on the cap and diode is the negative side). Wrap the V+ and GND power lines to your camera and your video transmitter through the ferrite coil at least 5 times.
No comments:
Post a Comment